Видео

Make the OctoRocktopus, mine can’t seem to get it right

Slower is better

Great clear and useful information. Volunteer open door mission

so beautiful! love it!

You have to break the lugs loose before you lift the car. I pulled up on a guy who was there for an hour, trying to loosen his lugs while spinning his tire in the air. He was using rocks to try pin the tire and stop the spinning. Serious face palm moment. We helped him, good lord. 🤦‍♂️

Thanks for your video. I'm trying to figure this out. It seems a lot of systems have blue and red switches above the caps to turn on and off, but my system just has one blue and one red switch to turn the water on and off and I have the caps. My system is a Rinnai. Any suggestion?

just got my ender 3 a couple days ago and having trouble with it, do you have discord and possibly you could help me?

This machine are garbage 🗑 excuse me for saying that!! I just returned mines and got the older machines with the agitator, They washer with the agitator washes way better then this newer ones! Also it doesn’t fills up with enough water! I got a used machine like the one in the video omg after washing my clothing & towels I was itching like crazy these machine are garbage! Di tire research the agitator washer way better!!

Would not have that type machine

This always happens to me. I kind of like sprinklers too. I found a blue one on the ground.

Mine sticks out :(

Good video . We just bought a used cart with new batteries. So 5 years from now maybe batteries will be cheaper

Love it but I think you could have saved a lot of time. Especially from the pre-painting and then repainting after spackling and caulking. I would at most prime the boards before putting up. But when I’ve done it I’ve put sanded boards up unpainted, done all the work (nails, spackling sanding caulking, hit everything with a tinted primer, let it dry and painted. When painting do brush work first then use the roller to cover as many brush marks on the panels as possible. Looks great though. Next time save yourself a few hours! :-)

tons of room left on the level legs to lift that washer up to your counter?

Hilarious 😂 Did you direct spray with full strength Super Clean or did you dilute it?

Is it a lion

Got a laugh at the start of the video. We have the same wrought iron above our head board and are now putting up board and batton - and close to the same wall color.

This is a snake oil unless proven by multiple independent research. And I wonder why no one is doing such research even though it could be so good for environment compared to salt water softeners.

Udaya💡💡💡

What was wrong with it

Excellent disassembly and cleaning instructions. A thought or two; acids clean hard-water deposits and baking soda neutralizes vinegar not sure why they are used together. Ammonia dissolves organic matter. I add 1/4 cup of citric acid and run the self clean cycle. When it spins that out I add a gallon of clear ammonia. When the tub fills I pause the cycle for a couple of hours. Press start and let it finish. And we leave the lid open after each wash.

This is the best video I've seen on this!

Can you run the washer without the agitator or the wash bucket inside the washer? I have a bunch of water and soap at the bottom of my washer now.

Seems like a good way to fill the water line with dirt. I realize it's more work, but if I can't just replace the nozzle by pulling up the stem and holding it, I'll dig around the body to replace it.

the problem is that big nut is stuck, and it wouldn't budge no matter how hard i hit it with special tool. How did you unbolt the center big nut?

Why not use polyurethane or MDF? It seems most crown molding is polyurethane. I also cant decide if crown molding at the top would look good.

Did you use primer first ?

you didn't need to lower the levelling feet? That's where I'm stuck. I don't have room to get to them :/

I’m about to buy this once I get another pay check, it will only be 28% of the profits, so I was a little concerned when looking into a 3d printer because it could be pretty crappy. After learning more about them and a full month of study, I realize that isn’t really the case. In fact, a lot of 3D printer are pretty cheap compared to what I thought. So I hope I’m somewhat well equipped, but I think the only problem with that print is that you didn’t properly level it. If you don’t level the bed, the print will become choppy and messed up.

How to SUPER CLEAN your Kitchen, Grill, Engine Bay, and Wheels with the ULTIMATE DEGREASER | Review ruclips.net/video/jd4G0dGB6xg/видео.html

Cries in apartment with maintenance ppl who don’t kno what they’re doing n basically want me to just use a disgusting used washer.

Tile floors in a bedroom is awful. So cold and hard.

What are those bolts at the bottom of the washing machine drum are you torquing those down to? Do you know what the manufacturer recommends?

Thanks for your help

Very surprised that you didn't remove the old fabric.

How to SUPER CLEAN your Kitchen, Grill, Engine Bay, and Wheels with the ULTIMATE DEGREASER | Review ruclips.net/video/jd4G0dGB6xg/видео.html

Nice. How do you remove the grey top of that bad boy? We took ours apart but that top part still has water in it?

How to SUPER CLEAN your Kitchen, Grill, Engine Bay, and Wheels with the ULTIMATE DEGREASER | Review ruclips.net/video/jd4G0dGB6xg/видео.html

It looks great! What color did you use? I’m working on a project and the fountain is a reddish/rust color and I want it more natural looking and the color you used is the exact look I want.

I mean it's a good video it's about 30 seconds short. I would have liked to see the whole thing.

does it allow metal fillament

Can you do my Math for my wall 😅

1:24 OMG. Man does that look CLEAN. You should see ours. We live on a lake with bottom of the lake ROCKS! Tried all those products and nothing cuts through it. We have to mix some muriatic acid. Lake Association needs to get together and get city water where we live.

How to SUPER CLEAN your Kitchen, Grill, Engine Bay, and Wheels with the ULTIMATE DEGREASER | Review ruclips.net/video/jd4G0dGB6xg/видео.html

So none of the electrical and/or magnets systems which propose that will "clean" your water actually cleans your water. What they do is crystalize the minerals, so they are easier to clean. To remove particles from your water you either need a Water Softener or you need a Filtration system. If you have terrible water like these people, then this system will simply make it easier to clean but won't stop any of the spots or ring around the toilet. If you have a decent City Water you might see better results, but honestly it won't do anything for any of the chemicals in your water either (fluoride or chlorine) or any pathogens in the water. Great video though.

Bro that intro gave me aids 🫨💀

How to SUPER CLEAN your Kitchen, Grill, Engine Bay, and Wheels with the ULTIMATE DEGREASER | Review ruclips.net/video/jd4G0dGB6xg/видео.html

When is it available dude ?!

Well shoot, I've got to do this now! How long did it take and did you have to do anything special to balance the drum once you reassembled?

Great sharing.